how to clean an electric dab rig: 5 powerful easy steps 2025
Keep Your Sessions Fresh: Electric Dab Rig Cleaning Essentials
How to clean an electric dab rig in 5 simple steps:
- Power off and unplug your device completely
- Disassemble by removing the glass and atomizer carefully
- Clean the atomizer with isopropyl-dipped cotton swabs (never submerge electronics)
- Soak glass components in 91-99% isopropyl alcohol for 10-30 minutes
- Rinse thoroughly with room temperature water and air dry completely before reassembling
Let’s be honest — that shiny new e-rig you invested in deserves proper care. Electric dab rigs have revolutionized the concentrate experience, offering precise temperature control without the hassle of torches. But here’s the reality — that impressive vapor production comes with a responsibility: regular maintenance is essential.
I’ve seen it countless times at our Queens dispensary — customers love their e-rigs until residue buildup ruins the experience. There’s wisdom in that old saying: “A clean rig is a happy rig, and it makes for a better session.” Without regular cleaning, sticky residue doesn’t just look unappealing — it compromises flavor, device performance, and potentially your health.
As the owner of Terp Bros in Astoria, I’ve helped many customers extend the life of their devices through proper maintenance. Trust me when I say the difference between an average dab and an exceptional concentrate experience often comes down to one thing: how clean your gear is.
If you’re searching online about how to clean an electric dab rig, you might also be interested in learning more about electric dab rigs in general or how to use an electric dab rig properly.
What You’ll Learn
This guide isn’t just about making your device look pretty (though that’s a nice bonus). I’m going to walk you through everything you need to know about keeping your e-rig performing like new.
You’ll master the cleaning basics that transform a gunky device into a pristine one. I’ll show you how proper maintenance dramatically boosts performance — those temperature settings work much better when they’re not fighting through layers of residue. Most importantly, you’ll find how cleaning preserves that pure, nuanced flavor profile that made you invest in an electric dab rig in the first place.
Whether you just unboxed your first e-rig or you’re looking to level up your maintenance game, I’ve got you covered. From quick daily wipe-downs to deep cleaning sessions, we’ll make sure your device delivers exceptional experiences every time. No chemistry degree required — just some simple supplies and a little bit of your time.
Ready to get that rig sparkling? Let’s transform your dabbing experience!
What Makes Electric Dab Rigs Different?
Remember the days of wielding a torch like some kind of cannabis alchemist? Those days are (mostly) behind us thanks to electric dab rigs. These modern marvels have transformed concentrate consumption from a somewhat intimidating process into something much more approachable.
Electric dab rigs represent a genuine evolution in the concentrate experience. Instead of the traditional torch-and-nail setup, e-rigs feature sophisticated built-in heating elements that do all the temperature work for you. This isn’t just convenient—it’s a game-changer for consistency and safety.
The most noticeable difference is the precision temperature control these devices offer. Unlike trying to guess when your traditional banger is at the right heat, e-rigs let you dial in exact temperatures (typically between 315°F and 900°F). This precision means you can customize your experience for either maximum flavor or bigger clouds, depending on your preference.
At the heart of any e-rig is its built-in heating element—usually an electronic atomizer or e-nail. This component replaces the traditional quartz, ceramic, or titanium nail that required external heating. The technology behind these heating elements has come a long way, offering more even heating and better flavor preservation.
Perhaps the most welcome change for many users is that there’s no torch required. Not only does this eliminate a potential fire hazard, but it also makes the whole process more discreet and apartment-friendly. No more explaining to concerned neighbors why you have a mini blowtorch in your living room!
Like their traditional counterparts, most electric models incorporate water filtration chambers for cooling and filtering vapor. This familiar element helps ensure your hits remain smooth and less harsh on your throat and lungs.
The portability factor is huge with e-rigs. Many models come with rechargeable batteries designed specifically for on-the-go use. This means you can enjoy high-quality dabs whether you’re at home or (discreetly) enjoying the great outdoors—something that was virtually impossible with traditional setups.
Finally, e-rigs feature a carefully engineered vapor path from concentrate to inhalation, designed to maximize flavor and efficiency. This thoughtful design ensures you get the most out of your concentrates with minimal waste.
Understanding these differences isn’t just about appreciating your device—it directly impacts how to clean an electric dab rig properly. The combination of sensitive electronic components and glass parts requires a more thoughtful approach to maintenance than traditional all-glass rigs. The cleaning methods we’ll cover are specifically designed to protect these unique features while keeping your sessions fresh and flavorful.
Why Regular Cleaning Matters
Health & Safety
Your health is the number one reason to keep that e-rig spotless. Those sticky residues left behind aren’t just unsightly—they can become a breeding ground for bacteria and mold, especially in the water chamber where moisture lingers. Even worse, that dark, charred buildup isn’t just affecting flavor; it contains potentially carcinogenic compounds that you definitely don’t want entering your lungs with each hit.
“You only get two lungs, so we seriously advise taking any and all measures to protect them!” as one of our regular customers at Terp Bros often reminds others.
Research from the National Institute on Drug Abuse highlights how residue in vaping devices can contain harmful compounds when heated repeatedly. While their studies focus primarily on nicotine devices, the principles apply to concentrate vaporizers as well.
Flavor Retention
For concentrate enthusiasts, flavor is everything—it’s what you’re paying for! Even tiny amounts of leftover residue from your last session can hijack the delicate terpene profile of your current dab. Think of it like using the same pan to cook fish and then immediately making pancakes without washing it first. That clean device ensures you’re tasting your Blue Dream concentrate, not the Gelato from three days ago mixed with who-knows-what.
I’ve watched customers’ faces light up when they try a freshly cleaned device after weeks of neglect. “I forgot my concentrates could taste this good!” is something we hear regularly at our Queens dispensary.
Vapor Efficiency
When airflow pathways get gunked up, your device works harder while delivering less. It’s like trying to breathe through a straw stuffed with cotton—you’re simply not getting what you paid for. Clean vapor paths mean better airflow, denser clouds, and more efficient use of your concentrates. You’ll literally get more bang for your buck when your device is clean.
Device Lifespan
Let’s be real—quality electric dab rigs aren’t cheap. They’re investments in your enjoyment, and like any investment, they need protection. Regular maintenance extends device life significantly. Those tiny electronic components and delicate connections don’t fare well when coated in sticky concentrate residue. While some darkening of atomizer walls is normal over time, keeping them relatively clean prevents premature failure and saves you from having to replace expensive parts.
Battery Longevity
A clean rig is an efficient rig. When residue builds up, your device struggles harder to reach and maintain temperatures, draining your battery much faster than necessary. Clean heating elements maintain temperature more efficiently, preserving battery life and reducing how often you need to recharge. For those who enjoy sessions on the go, this makes a huge difference in convenience.
As Maria, one of our loyal customers at Terp Bros, put it perfectly last week: “A clean rig runs as good as new, helps your health, and saves you a fortune in the long run.”
Taking just a few minutes after your sessions for quick maintenance pays massive dividends in performance, health protection, and keeping that investment working properly for years to come.
How Often & What You’ll Need
Cleaning Frequency
Let’s talk timing — when exactly should you be cleaning that beautiful e-rig of yours? The answer depends on how often you’re enjoying those dab sessions.
For the daily dabber, I recommend a quick post-session swab after each use (takes just 30 seconds!) and a deep clean weekly. This prevents any stubborn buildup before it becomes a problem. If you’re more of a weekend warrior, a thorough cleaning every two weeks will keep your rig in prime condition.
Monthly users should still commit to a full disassembly and deep clean after every few sessions. Trust me, it’s much easier to maintain a clean rig than to resurrect a neglected one!
“I always tell customers that a 30-second wipe-down after each session saves you a 30-minute scrubbing session later,” is something I find myself repeating at the shop almost daily.
And here’s an important tip for our social dabbers: if you’re sharing your device with friends (because sharing is caring!), a quick sanitizing wipe-down between users isn’t just courteous—it’s a smart health practice.
Essential Cleaning Supplies
Ready to assemble your how to clean an electric dab rig toolkit? Here’s what you’ll need for success:
First and foremost, isopropyl alcohol (91-99%) is your best friend. The higher the percentage, the better—it dissolves residue more effectively and evaporates faster, which is crucial when you’re cleaning electronic components. That quick evaporation means less chance of moisture damage to your device.
Cotton swabs are absolute must-haves for precision cleaning of your atomizer and those hard-to-reach nooks. I keep a dedicated jar of them right next to my rig for quick post-session maintenance.
For those stubborn spots in glass components, coarse salt works wonders as a gentle abrasive when combined with alcohol. Pipe cleaners can be lifesavers for clearing vapor paths, while microfiber towels are perfect for lint-free drying.
To make the cleaning process less messy, grab some rubber stoppers or wine corks to plug openings when you’re shaking cleaning solution inside glass components. Nitrile gloves will save your hands from both sticky residue and drying alcohol, and resealable plastic bags make for convenient soaking containers for smaller glass pieces.
Alternative Cleaning Solutions
Not everyone has isopropyl alcohol on hand, and some folks prefer more natural cleaning methods. While iso is king in efficiency, there are alternatives that work well with a bit more patience:
• White vinegar and salt makes for an effective combination, though you’ll need to soak glass parts for about two hours—considerably longer than with alcohol.
• Baking soda and vinegar creates that satisfying foaming action that helps lift stubborn residue. It’s gentler on glass components but requires a thorough rinse afterward.
• Lemon juice and warm water can work overnight. The citric acid is milder but effective with time, and leaves a fresh scent rather than the clinical smell of alcohol.
At Terp Bros, we’re all about helping our Queens community enjoy the cleanest, tastiest dabs possible. That’s why we’ve curated a selection of accessories that make maintenance easier and more effective. Stop by our Astoria shop, and we’ll happily walk you through the best cleaning products for your specific device—we might even share a few insider tips not covered in this guide!
How to Clean an Electric Dab Rig: Step-by-Step Guide
Now that you understand the importance of cleaning and have gathered your supplies, let’s break down the process into manageable steps:
Before you dive in, keep these golden rules in mind: never submerge electronic components in liquid (seriously, just don’t do it), follow your specific model’s disassembly guidelines, give everything plenty of time to dry completely, check that all vapor paths are clear before using again, and consider collecting that reclaim if you’re into that sort of thing (though honestly, the flavor isn’t going to win any awards).
Step 1: Disassemble Safely — The First Rule in How to Clean an Electric Dab Rig
Taking your e-rig apart correctly is the foundation of a good cleaning session. First things first, make sure your device is completely powered down and unplugged. If it’s battery-operated, remove the battery if possible — safety first, always!
Gently unscrew or detach the atomizer from the base. This little powerhouse is where all the heating magic happens, so handle it with care. Next, remove the glass bubbler or water chamber from the base. Give it a quick rinse with lukewarm water (never hot!) to flush out any loose particles and old water.
While you’re at it, take a moment to inspect those O-rings and gaskets. These rubber heroes are crucial for proper sealing, and they can wear out over time. Set them aside somewhere safe where they won’t roll away or get lost.
“At all costs, avoid getting water anywhere near the base of the unit, or the battery connectors,” Mariano Bustamante, an e-rig specialist we work with at Terp Bros, always reminds our customers. It’s solid advice that can save you from a world of electronic heartbreak.
Step 2: Clean the Atomizer/E-Nail without Damage — How to Clean an Electric Dab Rig Component
Your atomizer deserves special attention — it’s both delicate and essential to your dabbing experience. Grab a cotton swab, dip it in high-percentage isopropyl alcohol (91-99%), and make sure it’s damp but not dripping wet. Gently swab the inside of the atomizer to remove visible residue.
If you’ve got a ceramic atomizer, treat it like fine china — they can crack if you get too aggressive. And please, for the love of all things vapor, NEVER scrape your atomizer with hard tools. This isn’t the time to bust out metal tools or that random pointy thing you found in your drawer. Gentle swabbing only!
Don’t forget to clean those contact pins where the atomizer connects to the base. A dry cotton swab works perfectly here — you want these connections clean but definitely not wet. Once you’re done, let the atomizer air dry completely for at least 10 minutes before putting everything back together.
For those stubborn, baked-on bits, try running an empty heat cycle at the lowest setting to soften things up before cleaning. This works particularly well with precision devices like the Puffco Peak Pro Smart Rig that we carry at Terp Bros.
Step 3: Soak the Glass Bubbler or Water Chamber
While your atomizer is taking its drying break, let’s focus on getting that glass sparkling clean. Grab a large resealable plastic bag and fill it with enough isopropyl alcohol to fully submerge your glass components. For extra cleaning power against stubborn residue, add a tablespoon of coarse salt to act as a gentle abrasive.
Place your glass pieces in the bag, seal it up tight, and let them soak for 10-30 minutes. How long depends on how gunked up things are — light users might only need 10 minutes, while heavy users might need the full half-hour or more for serious buildup.
Every few minutes, give the bag a gentle shake to help the solution reach all areas and let that salt work its scrubbing magic. The plastic bag method is what we jokingly call “a blessing when it comes to ease and less mess” at our Queens dispensary. It contains that strong alcohol smell and prevents spills while still getting everything squeaky clean.
If you’re using alternative solutions like vinegar and salt, be prepared to extend your soaking time to about 2 hours. Going the natural route with lemon juice and water? Plan for an overnight soak — Mother Nature takes her time, but she gets the job done.
Step 4: Rinse, Dry & Reassemble
Proper rinsing and drying aren’t just steps to rush through — they’re crucial for preventing damage and ensuring your next session tastes amazing. Take your glass components out of the cleaning solution and rinse thoroughly with room-temperature water. I can’t stress this enough: never use hot water on glass that’s been soaking in cool alcohol — that temperature shock can cause cracks.
Keep rinsing until all traces of alcohol and salt are gone. Then place your glass parts upside-down on a clean towel to drain and air dry completely. This typically takes 30-60 minutes, but on humid days, it might take longer. Use dry cotton swabs to reach those annoying water droplets hiding in hard-to-reach spots.
Before you start putting things back together, make absolutely sure everything is 100% dry, especially where components connect to electronic parts. Moisture and electronics are not friends — not even casual acquaintances.
Carefully reattach the atomizer to the base, making sure it’s properly seated. Then reconnect your glass components according to your device’s instructions. As a final precaution, run one empty heating cycle at a low temperature to burn off any microscopic cleaning residue before loading your next dab.
As we often tell folks who visit Terp Bros, “Patience is key” when it comes to drying. That extra 15 minutes of drying time can save you from a world of water damage headaches.
Step 5: Quick Daily Maintenance Tips
The secret to less frequent deep cleaning? Daily mini-maintenance. After each session, while the atomizer is still warm (but not hot enough to burn you), use a cotton swab to wipe away any remaining concentrate. This simple 10-second habit can dramatically reduce buildup.
Change the water in your bubbler daily — stale water not only tastes terrible but can also harbor bacteria. Fresh water = fresh flavor. Keep a microfiber cloth nearby to occasionally wipe down the exterior of your device. This prevents dust and fingerprint buildup that can make your beautiful e-rig look neglected.
Always store your device upright when not in use to prevent water from sneaking into places it shouldn’t go. And if you’re taking your rig on trips around Queens (or beyond), use those included travel caps to prevent leaks and protect your glass components.
“Consistency is key for maintaining optimal device performance,” we often remind customers browsing our selection at Terp Bros. “The more frequently you clean your rig, the less rigorous each cleaning has to be.” It’s like flossing your teeth — a little regular maintenance saves you from the deep cleaning drama later.
Troubleshooting Stubborn Residue & Reclaim
Let’s face it — even with your best cleaning efforts, sometimes that stubborn buildup just won’t budge. As someone who’s helped countless customers rescue their beloved e-rigs from the brink of retirement, I’ve got some battle-tested solutions for those challenging cleaning situations.
Dealing with Burnt-On Wax
That blackened, crusty residue that seems permanently fused to your device? Don’t panic — we’ve all been there.
For glass components that are completely removable from electronics, the torch method can work wonders. Carefully apply heat from a torch until you see the residue starting to soften, then immediately (but gently!) wipe with a cotton swab. Never, ever apply flame to anything connected to electronic parts — I’ve seen too many fried circuits from this mistake.
Sometimes patience beats force. An extended isopropyl soak of 12-24 hours can dissolve what a quick clean can’t. For particularly stubborn spots, try my favorite trick: a 60/40 mixture of isopropyl alcohol and warm water. This gentler solution can work magic on tough residue without risking damage to your glass.
Addressing “Chazzed” Coils
That dreaded black tar buildup on ceramic atomizers (what we call “chazzing”) isn’t just unsightly — it seriously impacts your flavor and vapor production.
Specialized cleaners like Orange Chronic can be surprisingly effective on ceramic surfaces. The Q-tip method works well here: dip a cotton swab in your cleaner, apply to the affected area, give it a minute to work, then gently wipe away.
But as my grandmother always said, “an ounce of prevention is worth a pound of cure.” The best way to avoid chazzing is consistent cleaning after each session and avoiding those tempting but damaging high-temperature dabs that scorch the ceramic.
Harvesting and Using Reclaim
One person’s residue is another’s reclaim! Many of my customers at Terp Bros actually collect this leftover concentrate rather than discarding it.
If you’re interested in harvesting reclaim, strain your used isopropyl alcohol through a fine mesh into a glass dish. Let the alcohol completely evaporate in a well-ventilated area (and please, keep it away from any open flames!). What remains is your reclaim — already decarboxylated and ready for use.
While reclaim generally produces a harsher taste when dabbed again, it works beautifully in edibles. Just ensure all alcohol has completely evaporated before using, and remember that it contains residue from previous sessions — so the flavor profile will be… let’s call it “complex.”
Controlling Odors
Nothing ruins a fresh dab faster than the lingering funk of stale water or old concentrate.
A simple drop of lemon juice in your rinse water can work wonders for freshening up glass components. For particularly persistent odors, a baking soda solution soak (glass parts only!) helps neutralize even the most stubborn smells.
The simplest solution? Change your water after each session. It takes seconds but prevents that swampy aroma from developing in the first place.
As Miguel, one of our regular customers at Terp Bros, always says with a knowing smile, “A clean rig saves you a fortune in the long run.” He’s absolutely right — proper maintenance not only extends your device’s lifespan but ensures you’re getting the full flavor profile and effects from every dab. When you’ve invested in quality concentrates, the last thing you want is old residue muddying the experience.
Avoid These Common Cleaning Mistakes
Even the most well-intentioned e-rig owners can accidentally damage their devices during cleaning. I’ve seen it happen countless times at our Terp Bros shop — customers bring in their beloved devices with water damage or cracked components, all from simple cleaning mistakes that could have been avoided.
1. Soaking Electronic Components
I can’t stress this enough — never submerge your base unit or any electronic parts in liquid. This is the fastest route to turning your investment into an expensive paperweight. One customer came in last month after submerging their entire unit in alcohol, and sadly, there was nothing we could do to resurrect it. Stick to slightly damp cotton swabs for electronic components, and save the soaking for glass parts only.
2. Using Boiling or Hot Water
The temptation to use hot water makes sense — heat cleans better, right? Unfortunately, rapid temperature changes can cause even high-quality glass to crack or shatter. I’ve winced hearing the stories of customers who watched their glass chambers split right before their eyes after a hot water rinse. Always use room-temperature or slightly warm water instead — patience beats replacement costs every time.
3. Scraping Ceramic or Quartz Surfaces
That stubborn residue can be frustrating, but attacking it with metal tools is a recipe for disaster. Ceramic and quartz surfaces scratch easily, and once damaged, they’ll never perform the same again. One regular at our Queens shop learned this the hard way after taking a dab tool to his atomizer — the scratches became permanent collection points for new residue. Cotton swabs and isopropyl alcohol might take longer, but they preserve your investment.
4. Skipping Adequate Dry Time
We all get impatient sometimes, but reassembling before everything is bone-dry is asking for trouble. Trapped moisture leads to mold, bacterial growth, and potentially shorts out electronics. Give everything at least 30-60 minutes to air dry completely. As we like to say at Terp Bros, “A rushed cleaning is a ruined rig.”
5. Using Low-Quality Isopropyl Alcohol
That 70% alcohol might be cheaper, but it’s a false economy. Lower concentrations contain more water, which takes longer to evaporate and increases the risk of moisture damage. The 91-99% stuff costs a bit more but evaporates quickly and cleans more effectively. Your premium device deserves premium cleaning products.
6. Over-Salting Your Cleaning Solution
While salt works wonders as an abrasive, too much can actually scratch your glass. You only need enough to help dislodge the residue — about a tablespoon per cup of alcohol is plenty. Think of salt as a gentle exfoliant, not sandpaper.
7. Losing Small Parts During Cleaning
Those tiny O-rings and gaskets might seem insignificant, but they’re crucial for proper function. Keep a small container nearby specifically for these components during cleaning. One customer joke that has become our shop mantra: “The floor eats O-rings for breakfast.”
8. Using a Hair Dryer to Speed Drying
It seems like a smart hack, but heat and forced air can damage delicate components and push moisture deeper into crevices where it can cause problems later. Natural air drying might take longer, but it’s always the safest approach for your expensive equipment.
9. Cleaning on an Unsuitable Surface
Working over a towel or soft mat isn’t just about protecting your device — it’s about protecting your floors and furniture too. Concentrate residue can stain surfaces, and dropped glass components can damage both themselves and whatever they land on. A simple towel creates a safe workspace and catches any spills.
10. Ignoring Manufacturer Guidelines
Different e-rigs have their own quirks and requirements. The cleaning process for a Puffco might differ slightly from other brands, so always check your device’s manual for any special instructions. The few minutes spent reviewing can save hundreds in replacement costs.
At Terp Bros, we’ve built relationships with customers throughout Queens who bring their devices in for advice when something goes wrong. Almost always, the damage could have been prevented with proper cleaning techniques. Taking care of your e-rig isn’t just about maintaining performance — it’s about protecting your investment for years of enjoyment.
Ready to Dab Smarter?
There’s something deeply satisfying about taking that first hit from a freshly cleaned electric dab rig. The flavor pops, the vapor flows smoothly, and you can actually taste what you paid for. It’s not just about being tidy—it’s about respecting your experience and your investment.
Throughout my years helping customers at Terp Bros, I’ve seen the difference proper maintenance makes. Folks who clean regularly simply enjoy their sessions more and replace their devices less often. It’s as simple as that.
A clean rig isn’t just about looking good—it delivers real benefits:
The flavors from your concentrates shine through without the muddy interference of old residue. Your device heats more efficiently, saving battery life and delivering consistent performance. And perhaps most importantly, you’re not inhaling potentially harmful buildup session after session.
Here in Queens, we’ve built a community of enthusiasts who understand that maintenance culture isn’t about being fussy—it’s about getting the absolute most from your concentrates. Whether you’re dabbing top-shelf live rosin or enjoying more affordable options, a clean rig levels up every experience.
At Terp Bros, we proudly serve neighbors throughout Astoria, Jackson Heights, Woodside, Sunnyside, and all across Queens with our convenient delivery options. We’ve carefully selected our lineup of Puffco products with maintenance in mind, focusing on devices that balance performance with practicality.
When customers ask me about investing in a quality e-rig, I always remind them that how to clean an electric dab rig is just as important as which one to buy. The small time investment—just 15–20 minutes a week—pays off enormously in the long run.
Whether you’re new to the concentrate world or a seasoned enthusiast, developing these cleaning habits now will transform your sessions from good to exceptional. Your lungs, your taste buds, and your wallet will all thank you.
In concentrates, cleanliness isn’t just next to godliness—it’s next to cloudiness, tastiness, and the pure enjoyment that brought you to electric dab rigs in the first place.
Frequently Asked Questions about How to Clean an Electric Dab Rig
How often should I deep-clean my electric dab rig?
If you’re hitting your e-rig daily (or close to it), aim for a deep cleaning every 1–2 weeks to keep things fresh. More occasional users can stretch that to 3–4 weeks without much worry. The real game-changer, though? That quick post-session wipe of your atomizer while it’s still warm but not hot. This simple habit dramatically reduces how often you’ll need those deep cleans.
Your cleaning schedule also depends on what you’re dabbing. Those darker, stickier concentrates tend to leave more residue behind, potentially requiring more frequent cleaning sessions. Trust your senses on this one—when your dabs start tasting “off,” your vapor production drops, or you notice visible gunk building up, it’s time for a cleaning regardless of when you last did it.
“I always tell my customers to listen to their device,” says Jeremy from Terp Bros. “When flavor starts changing, your rig is basically asking for a bath.”
Can I use reclaim from my e-rig and is it safe?
You absolutely can collect and use reclaim from your e-rig, though there are some important things to consider before you do.
The good news is that reclaim is already decarboxylated (activated) through the initial dabbing process. This means it’s ready for consumption in edibles without needing any further processing—a nice little bonus for the waste-conscious consumer.
However, reclaim contains a mixture of cannabinoids and potentially some contaminants from repeated heating cycles. If you decide to use your reclaim:
• For dabbing: Brace yourself for a harsher taste and potentially stronger effects than fresh concentrate. Many find the flavor less enjoyable, but the effects are still potent.
• For edibles: Reclaim works wonderfully here, but start small! The potency can be surprisingly strong and somewhat unpredictable.
• For collection: After soaking in alcohol, strain your solution through a fine mesh into a glass dish. Allow ALL alcohol to completely evaporate in a well-ventilated area away from any flames or heat sources before using.
While we at Terp Bros always recommend fresh concentrates for the best flavor experience, we understand that collecting reclaim makes economic sense for many enthusiasts. Just know what you’re getting into flavor-wise!
What’s the safest way to dry electronic components after cleaning?
When it comes to drying the electronic parts of your e-rig, patience truly is a virtue. Natural air drying in a clean, dust-free environment is always your safest bet.
After giving electronic components a gentle wipe with a barely damp alcohol swab, place them on a clean microfiber cloth somewhere with good air circulation. Let them sit undisturbed for at least 30 minutes—longer if you’re in a humid environment like we often experience here in Queens during summer months.
For those crucial contact pins and connection points, I recommend using a completely dry cotton swab for a final once-over to ensure no moisture remains. These tiny connection points are where moisture can cause the biggest problems.
What you should never do: Use hair dryers, compressed air cans, or other forced-air methods. These might seem helpful, but they can actually push moisture deeper into the delicate electronic components where it can cause serious damage.
Before putting everything back together, take a moment for a visual inspection. If you’re even slightly unsure whether a component is completely dry, give it more time. An extra 20 minutes of drying time is much better than replacing a fried circuit board.
“The number one mistake I see customers make is rushing the drying process,” notes our repair specialist at Terp Bros. “That extra bit of patience protects your investment and keeps your device running smoothly for years.”
A properly dried and reassembled e-rig isn’t just about preventing damage—it’s about ensuring your next session is as perfect as your device was designed to deliver.
